loading

Gn Flow Meter é um fabricante líder de instrumentos de medição e controle microfluídicos.

Medidor de fluxo ultrassônico de canal aberto CX-OCFM 1
Medidor de fluxo ultrassônico de canal aberto CX-OCFM 1

Medidor de fluxo ultrassônico de canal aberto CX-OCFM

O medidor de vazão ultrassônico de canal aberto é um instrumento de vazão de alta precisão que é usado o princípio da medição ultrassônica do canal Venturi ou Calha Parshall. Mede o tempo de reflexão de volta após a onda sonora entre em contato para canalizar a água e, de acordo com a fórmula, descubra fluxo do canal, ele pode fornecer saída de fluxo, exibir velocidade de fluxo e fluxo total

    Opa ...!

    Nenhum dado de produto.

    vá para a página inicial

    Características

    Amplas faixas de medição

    LCD

    Alta precisão
    Baixa queda de pressão Tamanho pequeno Resposta rápida

    Dados técnicos

    Número do modelo: CX-OCFM

    Precisão: ±5%

    Faixa de fluxo: 0 ~9999999

    Fluxo instantâneo: 10L/s~10m3/s

    Saída: 4-20mA, relés RS485/232,4

    Material: ABS

    Tensão de trabalho: AC220V/DC12~24V

    Exibição: mecânica

    Flow Integrating Instrument Wide range of applications

    High precise, non-touching level measurement.Without impact on flow velocity. Low sensor power consumption,easy installation and orientation,application wildly.

    Ultrasonic open channel flow meter is a high accuracy flow ins- trument which is used the principle of ultrasonic measuring Ven- turi canal or Parshall fume. it measure the time of reflected back after sound wave contact to channel water, then according to the formula figure out channel flow, it can provide flow output, display flow velocity and total flow.

    Ultrasonic non-contact Liquid level measurement does not affect the flow rate at all, and the accurate liquid level measurement is an ideal liquid level meter. Probe type optional According to the requirements of the working conditions, the probe can choose special products such as IP68, anti-corrosion, explosion- proof, small blind area high precision, ultra-low power consumption, large range and so on.

    The instrument supports (4~20) mA, RS-485 data transmission (RS-485 interface has been installed in the instrument) Electrical interface The electrical interface is not easy to age and crack, waterproof and dustproof

    Real-time high-definition display, instantaneous flow, liquid level, cumulative flow information. With historical flow recording function, it can record the past 60 hours, 30 days, and 12 months,10 years of flow data, and real-time record data through SD card.

    Ultrasonic open channel flow meter is a high accuracy flow instrument which is used the principle of ultrasonic measuring Venturi canal or Parshall flume. It measure the time of reflected back after sound wave contact to channel water , then according to the formula figure out channel flow, it can provide flow output, display flow velocity and total flow. 1. High precise, non-touching level measurement. Without impact on flow velocity. 2. Low sensor power consumption,easy installation and orientation, application wildly. 3. Widely used in wall hanging right-angle rectangular weir, triangular weir, parshall flume and so on. 4. Easy operation, no need to calibration the input signal, only few parameters should be set. 5. Full functions, 2 line relays output, easy to connect actuating mechanism such as motor, Warner. 6. Flow integrating instrument possess data storage. When power off it can save 10 years. Data can be also saved by SD card. 7. According to condition , sensor can choose anti-erosion, anti- explosion, small blind area,ultra low power consumption or wild range 8. Base on user’s demand,it can attach flash disk、micro printer and storage battery .

    (1)Flux range :0~9999999 (Full eight cleared and the cumulative number plus 1) (2)Instant flux: 10L/s~10m3/s(based on wire type and size) (3)Accuracy:5% (4)Sensor range: 2m、5m、8m、10m(2m is standard, according condition other range is optional) (5)output(optional):4-20mA / RS485/232(Modbus)/ 4 relays (AC:5A 250V DC:10A 120V) (6)work voltage:AC220V or DC12~24V (7)consumption:<3W (8)material:ABS for instrument、ABS for sensor (9)optional item when order: MiniSD data collect 、GPRS/GPS、 micro-printer.

    Medidor de fluxo ultrassônico de canal aberto CX-OCFM 10

    Medidor de fluxo ultrassônico de canal aberto CX-OCFM 11

    Medidor de fluxo ultrassônico de canal aberto CX-OCFM 12


    Transferências

    Procurando medidores de vazão profissionais? Faça parceria com os melhores.
    E-MAIL US
    sales3@gnflowmeter.com
    SUPPORT 24/7
    +86 18930647859
    sem dados
    Produtos relacionados
    sem dados


    Shanghai Cixi Instrument CO., LTD foi fundada em 2008 e está localizada no parque industrial Shanghai Songjiang. Nós somos fabricantes profissionais de medidores de vazão que integram R&D, produção e vendas como um fabricante.
    Entre em contato conosco
    Pessoa de contato: Kenny Shao
    Telefone de contato: +86 18930647859
    Número de correio: sales3@gnflowmeter.com
    Whatsapp: 86 18930647859
    Endereço da empresa: Sala 402 Shuangzi Building B, Caohejing Hi Tech Park, No. 650 Xin Zhu Road, distrito de Songjiang, Xangai, China CEP: 201601
    Direitos autorais © 2024 Shanghai Cixi Instrument Co. Ltda - www.gnflowmeter.com  | Mapa do site
    Customer service
    detect