loading

Gn Flow Meter هي شركة رائدة في مجال أدوات قياس ومراقبة الموائع الدقيقة.

منتج
منتج
مضخة قياس تروس الإزاحة الصغيرة13 1
مضخة قياس تروس الإزاحة الصغيرة13 1

مضخة قياس تروس الإزاحة الصغيرة13

مبدأ العمل لمضخة قياس التروس، يتم تشغيل مضخة قياس التروس من خلال زوج من التروس المتشابكة مع بعضها البعض، أحدهما عبارة عن ترس قيادة والآخر عبارة عن ترس مدفوع، يتم تشغيله بواسطة ترس القيادة للشبكة و استدارة. هناك فجوة صغيرة بين الترس وغلاف المضخة. عندما يدور الترس، في غرفة الشفط حيث يتم فصل أسنان التروس تدريجيًا، يزداد الحجم المغلق بين الأسنان، مما يشكل فراغًا جزئيًا، ويتم امتصاص السائل إلى غرفة الشفط تحت تأثير فرق الضغط. أثناء دوران الترس، ينقسم السائل إلى طريقتين في الترس. يتم دفعه للأمام بواسطة التروس مع السكن وإرساله إلى تجويف الصرف. في تجويف التصريف، يتشابك الترسين تدريجيًا، وينخفض ​​الحجم، ويتم ضغط السائل الموجود بين التروس إلى منفذ التصريف

    وجه الفتاة...!

    لا توجد بيانات المنتج.

    الذهاب إلى الصفحة الرئيسية


    الميزات

    نطاقات قياس واسعة اللزوجة العالية Hعالية الدقة
    انخفاض الضغط المنخفض لا نبض مقاومة درجات الحرارة العالية

    البيانات التقنية

    رقم الموديل: CX-GWMP

    الدقة: ±0.3%

    ضغط العمل: 2-30mpa

    المواد: أداة الصلب

    الإزاحة: 30 ~ 100 سم مكعب

    اللزوجة المتوسطة: ≤com.millioncp1

    الثورة: 10...200 دورة/دقيقة

    درجة حرارة العمل: ≤200℃

    Gear metering pump Widely used in fluid measurement

    High precision, in a variety of temperature, high viscosity, high pressure, good wear resistance conditions, can ensure a stable and repeatable flow, measurement accuracy as high as 0.3%.

    The liquid is sucked into the suction chamber by a pile of occluded gears under the action of pressure difference, and then the medium is discharged from the chamber with rotation.

    Compared with stainless steel tool steel has higher hardness, because it is a passive rotation of hard material, can reduce wear and long service life

    one inlet and one outlet. Minimum displacement can be customized0.05cc The maximum displacement can be customized200~1000cc

    The working principle of the gear metering pump, the gear metering p- ump is through a pair of gears that mesh with each other, one of which is a driving gear and the other is a driven gear, which is driven by the d- riving gear to mesh and rotate. There is a small gap between the gear and the pump casing. When the gear rotates, in the suction chamber where the gear teeth are gradually disengaged, the enclosed volume between the teeth increases, forming a partial vacuum, and the liquid is sucked into the suction chamber under the action of the pressure dif- ference. As the gear rotates, the liquid is divided into two ways in the g- ear. It is pushed forward by gears with the housing and sent to the drain cavity. In the drain cavity, the two gears mesh gradually, the volume d- ecreases, and the liquid between the gears is squeezed to the drain port.

    Small displacement gear metering pump(图7)

    The gear metering pump with high accuracy,no pulsation;unique desi- gn,the the flexible drive connection between the motor and the mete- ring pump eliminates the influence of the alignment error between the motor and the metering pump on the measurement accuracy,and also prevents the motor from transmitting the vibration to the gear metering pump. High accuracy dosing and semi-automatic control More material for the more medium More sealing methods and good sealing performance Wide measurable range, minimum displacement 0.05cc High measurable medium viscosity, wide temperature range.Advantages: suitable for high viscosity, low speed, high pressure, good wear resista- nce. Disadvantages: not suitable for media containing carbon powder, iron powder,carbon fiber, and quartz sand.Application industry Resin, ink,coating, spinning oil agent,AB glue,textile dye, animal fat, neutral solution,coating machine adhesive,dispensing glue injection sy- stem,hot melt adhesive equipment,Pu gel,oil,coating oil,colorant, pol- yurethane, paraffin, et

    Small displacement gear metering pump(图9)

    Small displacement gear metering pump(图10)

    Small displacement gear metering pump(图11)

    Abglue equipment Polyurethane equipment Hot melt adhesive equipment


    التحميلات

    هل تبحث عن أجهزة قياس التدفق الاحترافية؟ شريك مع الأفضل.
    E-MAIL US
    sales3@gnflowmeter.com
    SUPPORT 24/7
    +86 18930647859
    لايوجد بيانات
    المنتجات ذات الصلة
    لايوجد بيانات


    تأسست شركة Shanghai Cixi Instrument CO.,LTD في عام 2008 وتقع في حديقة شنغهاي سونغجيانغ الصناعية. نحن شركة تصنيع أجهزة قياس التدفق الاحترافية التي تدمج R&د، الإنتاج والمبيعات كواحدة من الشركات المصنعة.
    الاتصال بنا
    شخص الاتصال: كيني شاو
    رقم هاتف الاتصال: +86 18930647859
    البريد الإلكتروني: sales3@gnflowmeter.com
    ال WhatsApp: 86 18930647859
    عنوان الشركة: غرفة 402، مبنى Shuangzi B، Caohejing Hi Tech Park، No. 650 طريق شين تشو، منطقة سونغجيانغ، شنغهاي، الرمز البريدي الصيني: 201601
    حقوق الطبع والنشر © 2024 شركة Shanghai Cixi Instrument Co. المحدودة - www.gnflowmeter.com  | خريطة الموقع
    Customer service
    detect