loading

Gn Flow Meter — ведущий производитель микрофлюидных приборов для измерения и контроля.

Продукт
Продукт
Малый шестеренный насос-дозатор14 1
Малый шестеренный насос-дозатор14 1

Малый шестеренный насос-дозатор14

Принцип работы шестеренного насоса-дозатора, шестеренчатый насос-дозатор заключается в паре шестерен, которые зацепляются друг с другом, одна из которых является ведущей шестерней, а другая - ведомой шестерней, которая приводится в зацепление ведущей шестерней и вращать. Между шестерней и корпусом насоса имеется небольшой зазор. При вращении шестерни во всасывающей камере, где зубья шестерни постепенно выходят из зацепления, замкнутый объем между зубьями увеличивается, образуя частичный вакуум, и жидкость под действием разности давлений всасывается во всасывающую камеру. Когда шестерня вращается, жидкость разделяется в шестерне на два канала. Он толкается шестернями с корпусом вперед и направляется в сливную полость. В сливной полости две шестерни постепенно сцепляются, объем уменьшается, и жидкость между шестернями выдавливается к сливному отверстию.

    Ой ...!

    Нет данных о продукте.

    перейдите на домашнюю страницу


    Особенности

    Широкие диапазоны измерения Высокая вязкость Высокая точность
    Низкое падение давления Нет пульсации Высокая термостойкость

    Технические данные

    Номер модели: CX-GWMP

    Точность: ±0.3%

    Рабочее давление: 2-30 МПа

    Материал: Инструментальная сталь.

    Объем: 30~100 куб.см

    Средняя вязкость: ≤1миллион cp

    Скорость вращения: 10...200 об/мин.

    Рабочая температура: ≤200℃

    Gear metering pump Widely used in fluid measurement

    High precision, in a variety of temperature, high viscosity, high pressure, good wear resistance conditions, can ensure a stable and repeatable flow, measurement accuracy as high as 0.3%.

    The liquid is sucked into the suction chamber by a pile of occluded gears under the action of pressure difference, and then the medium is discharged from the chamber with rotation.

    Compared with stainless steel tool steel has higher hardness, because it is a passive rotation of hard material, can reduce wear and long service life

    one inlet and one outlet. Minimum displacement can be customized0.05cc The maximum displacement can be customized200~1000cc

    The working principle of the gear metering pump, the gear metering p- ump is through a pair of gears that mesh with each other, one of which is a driving gear and the other is a driven gear, which is driven by the d- riving gear to mesh and rotate. There is a small gap between the gear and the pump casing. When the gear rotates, in the suction chamber where the gear teeth are gradually disengaged, the enclosed volume between the teeth increases, forming a partial vacuum, and the liquid is sucked into the suction chamber under the action of the pressure dif- ference. As the gear rotates, the liquid is divided into two ways in the g- ear. It is pushed forward by gears with the housing and sent to the drain cavity. In the drain cavity, the two gears mesh gradually, the volume d- ecreases, and the liquid between the gears is squeezed to the drain port.

    Small displacement gear metering pump(图7)

    The gear metering pump with high accuracy,no pulsation;unique desi- gn,the the flexible drive connection between the motor and the mete- ring pump eliminates the influence of the alignment error between the motor and the metering pump on the measurement accuracy,and also prevents the motor from transmitting the vibration to the gear metering pump. High accuracy dosing and semi-automatic control More material for the more medium More sealing methods and good sealing performance Wide measurable range, minimum displacement 0.05cc High measurable medium viscosity, wide temperature range.Advantages: suitable for high viscosity, low speed, high pressure, good wear resista- nce. Disadvantages: not suitable for media containing carbon powder, iron powder,carbon fiber, and quartz sand.Application industry Resin, ink,coating, spinning oil agent,AB glue,textile dye, animal fat, neutral solution,coating machine adhesive,dispensing glue injection sy- stem,hot melt adhesive equipment,Pu gel,oil,coating oil,colorant, pol- yurethane, paraffin, et

    Small displacement gear metering pump(图9)

    Small displacement gear metering pump(图10)

    Small displacement gear metering pump(图11)

    Abglue equipment Polyurethane equipment Hot melt adhesive equipment


    Загрузки

    Ищете профессиональные расходомеры? Партнер с лучшими.
    E-MAIL US
    sales3@gnflowmeter.com
    SUPPORT 24/7
    +86 18930647859
    нет данных
    Сопутствующие товары
    нет данных


    Компания Shanghai Cixi Instrument CO.,LTD была основана в 2008 году и расположена в промышленном парке Шанхая Сунцзян. Мы являемся профессиональным производителем расходомеров, который интегрирует R&D, производство и продажа как одного производителя.
    Свяжитесь с нами
    Контактное лицо: Кенни Шао
    Контактный телефон: +86 18930647859
    Электронная почта: sales3@gnflowmeter.com
    WhatsApp: 86 18930647859
    Адрес компании: Комната 402 Шуанци, корпус B, Парк высоких технологий Цаохэцзин, № 1. 650 Xin Zhu Road, район Сунцзян, Шанхай, Китай Почтовый индекс: 201601
    Авторские права © 2024 Шанхайская компания Cixi Instrument Co. ООО - www.gnflowmeter.com  | Карта сайта
    Customer service
    detect